KMB 28
Specification
- Weight: 12.73 lb / approximately 5.77 kg
- Frame: Xenoy thermoplastic
- Control knobs: ABS plastic
- Lens: Clear polycarbonate
- Hood: Neoprene
- O-rings: Buna-N
OUR CAPABILITIES
Capabilities
Select a category to explore equipment and method groups.
EXPLORE TWO CATEGORIES
Diving equipment and air supply
Diving equipment, communications, air supply and decompression for underwater work.
Underwater hydraulic tools
Hydraulic power and tools for subsea drilling, cutting, breaking and intervention.
KMB 18
Specification
- Weight: 13.63 lb / approximately 6.18 kg
- Frame: Fiberglass, polyester resin, polyester gel coat and carbon fiber
- Control knobs: ABS plastic
- Lens: Clear polycarbonate
- Hood: Neoprene
- O-rings: Buna-N
KMB 37
Specification
- Weight: 32.6 lbs.
- Helmet shell: Fiberglass, polyester resin, polyester gel coat, and carbon fibers
- Control knobs: Polyurethane
- Lens: Clear polycarbonate
- Neck dam: Neoprene
- O-Rings: Buna-N
- Head cushion: Nylon bag filled with #4 Polyester foam
TWO MEN AMRON COMMS BOX
Specification
- Volume setting for each diver and tender to their individual comfort level
- Divers can be set up on 4-Wire Mode or 2-Wire Mode or any combination of the two modes
- Ability to use both dynamic and pre-amplified diver microphones with a unique circuit that detects microphone type and automatically adjusts volume levels
- Input Impedance (Each Input): 250 Ohms
- Frequency Response: 300 - 10000 Hz
- Common Mode Rejection: 40 dB Minimum
- Current Drain Maximum Full Volume: 3 Amps
- Minimum Quiescent: 0.190 Amps
- Output Impedance: 4 Ohm
- Sensitivity (Input): 0.5 mV
THREE MEN DIVER AMRON COMMS BOX
Specification
- Volume setting for each diver and tender to their individual comfort level
- Divers can be set up on 4-Wire Mode or 2-Wire Mode or any combination of the two modes
- Ability to use both dynamic and pre-amplified diver microphones with a unique circuit that detects microphone type and automatically adjusts volume levels
- Weatherproof panel microphone for greater voice intelligibility
- Communicator can be left on charge indefinitely without damage to the batteries or communicator
- Communicator can be operated directly
- Enough audio power to support three divers
- Audio Power Output: 20 Watts per channel
- Frequency Response: 500 Hz to 3 kHz
- Isolation Transformer: Split Bobbin Medical Grade
SINGLE DIVER KMAC WITH COMMS
Specification
- Single Diver
- Men Diver Comms Box
- Cctv Recorder Device
- 10 Inch Screen Display
- One Button Stop Start Record
- External Pendrive Saving Data
- Ac Power Supply
TWO MEN DIVER KMAC
Specification
- Two Men Diver
- GIC 3/8 Breathing Air fitting
- GIC 1/4 Neumo fitting
- Build in Tescom Regulator
- Input Air Pressure 4500 PSI max
- Blade valve release air
AIR BANK 50 Litre
Specification
- Bull Nose Fitting
- 50 Litre
- 200 Bar / 3000 PSI
MCH16 COLTRI SUB 3 PHASE DRIVEN MOTOR
Specification
- 22 horse power ,hp
- Phase driven motor
- 3000 psI max charging
- 1440 rpm
- Null way charging
- Charging whip
- manual start stop
MCH 12 COLTRI SUB COMPRESSOR DRIVE BY HONDA 390X ENGINE
Specification
- 20 hp
- Petrol honda 390x engine
- 3000 psi max charging
- 3000 rpm
- Single charging whip
BAUER JUNIAR II BREATHING AIR COMPRESSOR
Specification
- Dimension (L x W x H) : 78 × 34 × 42 cm.
- Weight: 46 kgs.
- Air Delivery Rate: 100 L/min (3.5 cfm)
- No. of Tanks filled at a time: 1 tank.
- Motor: Electric or Gasoline.
- Accessory: Plastic Intake filter tube.
- Time to fill a 12-liter tank from 0 to 200 bars (3,000 psi): 24 minutes.PSI.
DIVER UMBILICAL
Specification
- Umbilical 100m, 150m, 200m and 300m
- GIC 3/8 air connector
- GIC 1/4 neumo connector
- Male underwater connector for camera, light and comms
- Fibron type material
TWIN LOCK DECOMPRESSION CHAMBER
Specification
- Twin Lock – Two Compartment
- 60 inch Diameter
- International Spec design
- Complete Facility in Container
